PHYTEC

• phyCORE-LPC 2294 8MBR 16MBF 1KBE I2C 4CAN ETH
• Basisplatine phyCORE HD200 V3
• EAD EtherNet Adapter Modul 10/100MBit
• phyCORE Basis Lochraster 2x160
• Steckernetzteil
• Alle notwendigen Kabel
• Quickstart Instruction
• Hardware-Manual zum phyCORE-LPC2292/LPC2294
• Schaltplan zum phyCORE-LPC2294 Zusatzplatine
• Schaltplan zum phyCORE-LPC2294 Basisplatine
• PHYTEC-Spektrum-CD
• Aushebelwerkzeug für alle Module

Basisplatine

• Carrier Board in EURO-card dimensions (100 x 160 mm)
• Receptacle socket for speedy and secure insertion, and subsequent programming, of the PHYTEC Single Board Computer modules with 200-pin high-density (0.635 pitch) Molex connectors.
• Dual DB-9 sockets for serial RS-232 interface connectivity
• Dual DB-9 connectors for CAN or RS-485 interface connectivity
• Space for an optional DS2410 Silicon Serial Number chip (for networking identification purposes)
• Receptacle for an optional battery
• Low-voltage socket for power supply connectivity
• Voltage supply for external devices and subassemblies
• GND connector (for connection of GND signal of measuring devices such as an oscilloscope)
• Expansion Bus: address, data, interface and all applicable I/O signals route from implemented phyCORE module to 2x80-pin Molex connectors, enabling connectivity to Add-On hardware

QuickStart Instruction phyCORE-LPC2292/LPC2294 Keil English (L-659e.pdf)
HardwareManual phyCORE-LPC2292/LPC2294 English (L-658e.pdf)