PHYTEC

• phyCORE LPC3180 32MBSR 32MBF 32KBEE
• Basisplatine phyCORE LPC3100 PROTOTYP
• Steckernetzteil
• PHYTEC-Spektrum-CD
• Alle notwendigen Kabel
• Aushebelwerkzeug für alle Module

Basisplatine

• Carrier Board in EURO-card dimensions (100 x 160 mm)
• RS-232: 2x female DB-9 connectors support UART5 and UART2
• USB (Host/Device/OTG) connectors:
• Standard A type connector for USB host functionality
• Standard B type connector for USB device functionality
• miniAB type connector for OTG functionality
• JTAG – 2.54mm pitch, 20-pin connector for JTAG debugging interface
• SD Card slot
• Reset push button
• Boot jumper
• 2x user buttons
• 4x user LEDs with jumpers to separate from I/O lines
• Battery receptacle for LPC3180 Real-Time Clock and SRAM back-up
• Keyboard – 2x8 2.54mm pitch connector for keyboard interface
• 1x potentiometer connected to one A/D input
• 5V. low-voltage socket for power supply connectivity
• 3V. and 5V. low voltage supplies for external devices and subassemblies
• GND connector (for connection of GND signal of measuring devices such as an oscilloscope)
• Expansion Bus: address, data, interface and all applicable I/O signals route from implemented phyCORE module to 2x80-pin Molex connectors, enabling connectivity to Add-On hardware

QuickStart Instruction phyCORE-LPC3180 (L-689e.pdf)
QuickStart Instruction phyCORE-LPC3180 (L-690e.pdf)