PHYTEC

• phyCORE-TC1130 32MBF 64MBR 4kEEP
• Basisplatine phyCORE TC1130
• phyCORE Basis Lochraster 2x160
• Tool-CD zum phyCORE-TC1175/TC1130
• HighTec GNU TriCor DevelophyCore-ent Suite
• Hardware-Manual zum phyCORE-C1775 Basisplatine
• Schaltplan zum phyCORE-TC1775 Basisplatine
• Schaltplan zum phyCORE-TC1775 Zusatzplatine
• Hardware-Manual zum phyCORE-TC1130
• Alle notwendigen Kabel
• USB-Buchsenleiste
• Steckernetzteil
• Aushebelwerkzeug für alle Module

Basisplatine

• The actual Development Board, which offers all essential components and connectors for start-up including: a power socket enabling connection to an external power adapter and serial interfaces of the SBC module at DB-9 connectors (depending on the module, up to two RS-232 interfaces and up to two RS-485 or CAN interfaces). All of the signals from the SBC module mounted on the Development Board extend to two mating receptacle connectors.

• A strict 1:1 signal assignment is consequently maintained from the phyCORE-connectors on the module to these expansion con­nectors. Accordingly, the pin assignment of the expansion bus depends entirely on the pinout of the SBC module mounted on the Development Board.

• As the physical layout of the expansion bus is standardized across all applicable PHYTEC Development Boards, we are able to offer various expansion boards that attach to the Development Board at the expansion bus connectors. These modular expansion boards offer supplemental I/O functions as well as peripheral support devices for specific functions offered by the controller populating the SBC module mounted on the Development Board.

• All controller and on-board signals provided by the SBC module mounted on the Development Board are broken out 1:1 to the expansion board by means of its patch field. The required connections between SBC module / Development Board and the expansion board are made using patch cables included with the expansion board.

HardwareManual phyCORE-TC1130 (L-665e.pdf)