Layer 1 Background

phyWAVE®-CC26xx

ARM CortexTM-M3

Wireless Controller Modul
IOT

Dieses phyWAVE-CC26xx wird als Wireless Controller Modul für die Kommunikation über Bluetooth Low Energy eingesetzt. Diese Module kommen im IoT-Enablement-Kit 2 zum Einsatz.

Technische Daten

phyWAVE-CC26xx IoT-Enablement Kit 2
CPU Texas Instruments ARM Cortex-M3 und Cortex-M0 (RF Core) Texas Instruments ARM Cortex-M3 und Cortex-M0 (RF Core)
Memory 128 kB Flash + 8 kB Cache, 20 kB RAM 128 kB Flash + 8 kB Cache, 20 kB RAM
Radio Receiver 2,4 GHz IEEE 802.15.4, ZigBee, RF4CE, Bluetooth Low Energy 2,4 GHz IEEE 802.15.4, ZigBee, RF4CE, Bluetooth Low Energy
RX/TX Current 5.9/6.1 mA 5.9/6.1 mA
Antenna PCB Antenna or configurable PCB Antenna or configurable
Interfaces UART, 2x SPI, Ultra-Low-Power-SPI, I2C, I2S, RTC, AES 10-31 GPIOs UART, 2x SPI, Ultra-Low-Power-SPI, I2C, I2S, RTC, AES 10-31 GPIOs
Crypto Cryptography Acceleration Unit (CAU), AES encryption Cryptography Acceleration Unit (CAU), AES encryption
ADC 12-Bit-ADC, 200 kS / s, 8 channels 12-Bit-ADC, 200 kS / s, 8 channels
Timer 4 Universal-Timer Module (8x 16-Bit- or 32-Bit-4x-Timer) 4 Universal-Timer Module (8x 16-Bit- or 32-Bit-4x-Timer)
RF output power Programmable output power -21 to +5 dBm Programmable output power -21 to +5 dBm
Sensitivity 6LoWPAN -100 dBm, BLE -96 dBm BLE -96 dBm
Operating System TI-RTOS
Certification CE compliant
Power Supply 1.8 V to 3.8 V 1.8 V to 3.8 V
Dimensions 19 x 28 mm 19 x 28 mm
Carrierboard phyNODE Sensor Board with phyWAVE-CC2650
Adapterboard TI CC2650 Multistandard Wireless MCU
Accessories Bluetooth 4.0 USB-Stick, TI XDS110 Debugger

Preistabelle zzgl. MwSt.

phyWAVE-CC2650 IoT-Enablement Kit 2
Serienpreis € 6,50
Angebot
€ 69,00
Angebot



Download

Hier gehts zum phyWAVE-CC26xx Download »