Release Notes

Release Notes AM335x-PD17.1.2
====================================
Changes since PD17.1.1                  2017-12-13
-----------------------------------------------------------------------
- Fix: NFS works in combination of DHCP and doesn't end in "not responding, still 
  trying" messages.
- Fixː The SD-Card image contains again a ubifs root filesystem.
- Fixː HDMI was initialised with a resolution of 1280x1024 because the bootloader
  hasn't passed the HDMI bootargs to the kernel
- Fixː TFTP can now access subdirectories without an "Invalid argument" error
- Fixː The NAND root filesystem will be found while booting from SPI

Changes since PD17.1.0                  2017-10-05
-----------------------------------------------------------------------
- Fix: The SDK build process failed due missing dependencies.
  Collected errors:
          * calculate_dependencies_for: Cannot satisfy the following
             dependencies for packagegroup-qt5-toolchain-target:
          * qtquick1-mkspecs * qtquick1-plugins * qtquick1-qmlplugins
          * qttools-mkspecs * qttools-staticdev *
          * opkg_solver_install: Cannot install package packagegroup-qt5-toolchain-
             target.

BSP-Yocto-AM335x-PD17.1.0            2017-09-29
-------------------------------------------------------------------------
- Linux Kernel v4.4.52
- barebox 2017.06.1
- Yocto 2.2.1 (morty)
- Qt 5.7

Tested Yocto Images:
---------------------------------
- phytec-qt5demo-image


Build Environment:
-----------------------------
- Ubuntu 16.04 64Bit


New Features:
----------------------
- Add support for EMMC - New AC158 display is now standard
- Added support for new machine:
           * phyboard-regor-am335x-2
           * phycore-emmc-am335x-1


Known Issues/Limitations:
-----------------------------------------

- phycore-am335x-som / phycore-r2-am335x-som:            
             * Boot tests showed in about 2 of 2000 boots that the SMSC LAN8710 phy  
                could not be found. The PHY ID readout is wrong. The generic PHY driver 
                will take over. Ethernet is still functional in this case.  

- phycore-am335x/phycore-r2-am335x:              
             * rtc1 (AM335x RTC) has high deviation  

- CAN tests with 20kbit/s did not run successfully. All other CANopen standard bit   
  rates are working. This can be fixed by switching the clock from 25 to 24 Mhz, but
  new problems with other components can occur.

Supported HW Overview

software compatible platform article number hardware description
phyboard-wega-am335x-1 PB-00802-0200C.A0 RDK 2014 WEGA 3354/800/256R/128F/FF/24V/C PEB-AV-01 (HDMI) PEB-EVAL-01
PB-00802-0101C.A0 RDK 2014 WEGA 3354/800/256R/128F/FF/5V/C PEB-AV-01 (HDMI) PEB-EVAL-01
PB-01402-001.A0 RDK 2014 WEGA 3354/800/256R/128F/FF/5V/C plugable module
PB-00802-010C-SYS.A1 WEGA 3354/800/256R/128F/FF/5V/C
PB-00802-020C-SYS.A1 WEGA 3354/800/256R/128F/FF/24V/C
phyboard-wega-am335x-2 PB-00802-008.A0 "WEGA 3354/800/256R/128F/FF/OF7""'/24V/C . PEB-AV-02 (Display AC138 EDT 7) PEB-EVAL-01"
PB-00802-020C-SYS.A1 WEGA 3354/800/256R/128F/FF/24V/C
phyboard-wega-am335x-3 PB-00802-005.A0 WEGA 3354-1G/512R/512F/FF/5V/I PEB-AV-01 (HDMI) PEB-EVAL-01
PB-00802-310I.A0 WEGA 3354-1G/512R/512F/FF/5V/I
phyboard-wega-am335x-4 PB-00802-410C.A0 WEGA 3354/800/512R/512F/FF/5V/C
phyboard-wega-r2-am335x-1 PB-00814-001.A0 WEGA-R2 3354/800/256R/128F/FF/24V/C
PB-00814-002.A0 WEGA-R2 3354/800/256R/128F/FF/24V/C
phycore-am335x-1 KPCM-051-SYS-LIN-D "512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Display 7"" WVGA"
KPCM-051-SYS-LINUX 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x
KPCM-051-SYS-LIN-US 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x
PCM-051-12102F0I.A1 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x
PCM-051-12113F0I.A0 512MB RAM/ NAND/ 8MBSPIFLASH/ 1GHz
phycore-am335x-2 PCM-051-23102F0I.A1 1GB RAM/1GB NAND/ 8MBSPIFLASH/800MHz
PCM-051-22151F0C.A1 1GB RAM/512MB NAND/ 8MBSPIFLASH/600MHz
phycore-am335x-3 PCM-051-01041E0I.A1 256MB RAM/256MB NAND/ 600MHz
PCM-051-02041E0I.A1 256MB RAM/512MB NAND/ 600MHz
PCM-051-02002E0I.A1 256MB RAM/512MB NAND/ 800MHz
phycore-am335x-4 PCM-051-0005160C.A1 256MB RAM/128MB NAND /600MHz
PCM-051-0005160I.A1 256MB RAM/128MB NAND /600MHz
phycore-am335x-5 PCM-051-00051F0I.A0 256MB RAM/128MB NAND/ 600MHz/4KBEE/ETH RTC
phycore-am335x-6 PCM-051-42102F0I.A0 1024MBR/512MBN/8MBSPIFLASH/800MHz
phycore-am335x-7 KPCM-051-SYS-LIN-D "512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Display 7"" WVGA with Wifi Adapter PCM-958"
KPCM-051-SYS-LINUX 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x with Wifi Adapter PCM-958
KPCM-051-SYS-LIN-US 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x with Wifi Adapter PCM-958
PCM-051-12102F0I.A2 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x with Wifi Adapter PCM-958
PCM-051-12113F0I.A0 512MB RAM/ NAND/ 8MBSPIFLASH/ 1GHz with Wifi Adapter PCM-958
phyboard-regor-am335x-1 PB-01802-001.A0 AM3352-1G/512MBR/N /FF/HUT/C
phycore-r2-am335x-1 PCM-060-12102F04I.A0 512MBR/N/8MBN//ETH/RTC/TMP/I
KPCM-060-SYS-LIN.A0
KPCM-060-SYS-L-D.A0
phycore-r2-am335x-2 PCM-060-01051E10I.A0 256MBR/256MBN/ETH/I
phycore-r2-am335x-3 PCM-060-12142F10I.A0 512MBR/512MBN/8MBNor/ETH/RTC/I
phycore-r2-am335x-4 PCM-060-12052F10I.A0 512MBR/N/8MBN//ETH/RTC/I
phycore-r2-am335x-5 PCM-060-43102F10I.A0 1GBR/N/ 8MBNor/ETH/RTC/PM/I
phycore-emmc-am335x-1 PCM-062-40143F10I.A0 1GBR/4GBE/8MBN/ETH/RTC/PM/I

Supported HW Detail

software compatible platform article number hardware description software descripton
phyboard-wega-am335x-1 PB-00802-0200C.A0 RDK 2014 WEGA 3354/800/256R/128F/FF/24V/C PEB-AV-01 (HDMI) PEB-EVAL-01
PB-00802-0101C.A0 RDK 2014 WEGA 3354/800/256R/128F/FF/5V/C PEB-AV-01 (HDMI) PEB-EVAL-01
PB-01402-001.A0 RDK 2014 WEGA 3354/800/256R/128F/FF/5V/C plugable module
PB-00802-010C-SYS.A1 WEGA 3354/800/256R/128F/FF/5V/C disable expansion boards in bootloader env
PB-00802-020C-SYS.A1 WEGA 3354/800/256R/128F/FF/24V/C disable expansion boards in bootloader env
PCM-051-00042F1C.A0 256MB RAM/128MB NAND /800MHz
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env,
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
PEB-AV-02-070W.A0 LCD-018-070-KAP + PEB-AV-02 enable expansion board in bootloader env
PEB-WLBT-01.A2 Expansion board Bluetooth-WiFi enable expansion board in bootloader env
phyboard-wega-am335x-2 PB-00802-008.A0 "WEGA 3354/800/256R/128F/FF/OF7""'/24V/C . PEB-AV-02 (Display AC138 EDT 7) PEB-EVAL-01"
PB-00802-020C-SYS.A1 WEGA 3354/800/256R/128F/FF/24V/C
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
PEB-AV-01.A1 Expansion board HDMI enable expansion board in bootloader env
PEB-WLBT-01.A2 Expansion board Bluetooth-WiFi enable expansion board in bootloader env
phyboard-wega-am335x-3 PB-00802-005.A0 WEGA 3354-1G/512R/512F/FF/5V/I PEB-AV-01 (HDMI) PEB-EVAL-01
PB-00802-310I.A0 WEGA 3354-1G/512R/512F/FF/5V/I disable expansion boards in bootloader env
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
PEB-AV-02-070W.A0 LCD-018-070-KAP + PEB-AV-02 enable expansion board in bootloader env
PEB-WLBT-01.A2 Expansion board Bluetooth-WiFi enable expansion board in bootloader env
phyboard-wega-am335x-4 PB-00802-410C.A0 WEGA 3354/800/512R/512F/FF/5V/C
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
PEB-AV-02-070W.A0 LCD-018-070-KAP + PEB-AV-02 enable expansion board in bootloader env
PEB-AV-01.A1 Expansion board HDMI enable expansion board in bootloader env
PEB-WLBT-01.A2 Expansion board Bluetooth-WiFi enable expansion board in bootloader env
phyboard-wega-r2-am335x-1 PB-00814-001.A0 WEGA-R2 3354/800/256R/128F/FF/24V/C
PB-00814-002.A0 WEGA-R2 3354/800/256R/128F/FF/24V/C
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
PEB-AV-02-070W.A0 LCD-018-070-KAP + PEB-AV-02 enable expansion board in bootloader env
PEB-WLBT-01.A2 Expansion board Bluetooth-WiFi enable expansion board in bootloader env
phycore-am335x-1 KPCM-051-SYS-LIN-D "512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Display 7"" WVGA"
KPCM-051-SYS-LINUX 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env
KPCM-051-SYS-LIN-US 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env
PCM-051-12102F0I.A1 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env
PCM-051-12113F0I.A0 512MB RAM/ NAND/ 8MBSPIFLASH/ 1GHz
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-am335x-2 PCM-051-23102F0I.A1 1GB RAM/1GB NAND/ 8MBSPIFLASH/800MHz Disable display expansion in bootloader env
PCM-051-22151F0C.A1 1GB RAM/512MB NAND/ 8MBSPIFLASH/600MHz Disable display expansion in bootloader env
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-am335x-3 PCM-051-01041E0I.A1 256MB RAM/256MB NAND/ 600MHz Disable display expansion in bootloader env
PCM-051-02041E0I.A1 256MB RAM/512MB NAND/ 600MHz Disable display expansion in bootloader env
PCM-051-02002E0I.A1 256MB RAM/512MB NAND/ 800MHz Disable display expansion in bootloader env
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-am335x-4 PCM-051-0005160C.A1 256MB RAM/128MB NAND /600MHz Disable display expansion in bootloader env
PCM-051-0005160I.A1 256MB RAM/128MB NAND /600MHz Disable display expansion in bootloader env
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-am335x-5 PCM-051-00051F0I.A0 256MB RAM/128MB NAND/ 600MHz/4KBEE/ETH RTC Disable display expansion in bootloader env
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-am335x-6 PCM-051-42102F0I.A0 1024MBR/512MBN/8MBSPIFLASH/800MHz Disable display expansion in bootloader env
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-am335x-7 KPCM-051-SYS-LIN-D "512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Display 7"" WVGA" Jumper carrierboard to use Wifi Adapter
KPCM-051-SYS-LINUX 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env, jumper carrierboard to use Wifi Adapter
KPCM-051-SYS-LIN-US 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env, jumper carrierboard to use Wifi Adapter
PCM-051-12102F0I.A2 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env, jumper carrierboard to use Wifi Adapter
PCM-051-12113F0I.A0 512MB RAM/ NAND/ 8MBSPIFLASH/ 1GHz jumper carrierboard to use Wifi Adapter
PCM-958 Expansion board Bluetooth-WiFi
phyboard-regor-am335x-1 PB-01802-001.A2 AM3352-1G/512MBR/N /FF/HUT/C
phycore-r2-am335x-1 PCM-060-12102F04I.A0 512MBR/N/8MBN//ETH/RTC/TMP/I
KPCM-060-SYS-LIN.A0
KPCM-060-SYS-L-D.A0
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-r2-am335x-2 PCM-060-01051E10I.A0 256MBR/256MBN/ETH/I
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-r2-am335x-3 PCM-060-12142F10I.A0 12MBR/512MBN/8MBNor/ETH/RTC/I
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-r2-am335x-4 PCM-060-12052F10I.A0 512MBR/N/8MBN//ETH/RTC/I
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-r2-am335x-5 PCM-060-43102F10I.A0 1GBR/N/ 8MBNor/ETH/RTC/PM/I
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-RES-070.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch
phycore-emmc-am335x-1 PCM-062-40143F10I.A0 1GBR/4GBE/8MBN/ETH/RTC/PM/I
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env
LCD-018-070-KAP.A1 Display 7,0'' AC138 enable expansion board in bootloader env
LCD-018-070-KAP.A2 Display 7,0'' AC158 enable expansion board in bootloader env
LCD-018-070-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch
LCD-018-070-RES.A0 Display 7,0'' resistive AC158 enable expansion board in bootloader env, Jumper must be set for resistive touch