Übersicht

Yocto project

BSP-Yocto-AM335x-PD15.2.0

Die untenstehenden Platform Support Charts bieten einen Überblick über alle Funktionen und die unterstützten Hardwareplattformen

Platform Support Chart PD15.2.0

software compatible platform article number hardware description software descripton QA Testsystem
phyboard-maia-am335x-1 PB-00702-002.A1 AM3359-800/512R/512F/8N/OEM02 PB disable display expansion in bootloader env Fully tested
PB-00702-004.A0 "AM3359-800/512R/512F/8N/FF/HMI7""K PB" not tested
PEB-B-001.A2 Expansion board Bluetooth-WiFi "enable expansion board in bootloader env
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phyboard-maia-am335x-2 PB-00702-003.A1 AM3352-600/256R/128F/8N/OEM01 PB disable display expansion in bootloader env boot tests
PEB-B-001.A2 Expansion board Bluetooth-WiFi "enable expansion board in bootloader env
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phyboard-maia-am335x-3 PB-00702-006.A0 "AM3359-800/512R/512F/8N/FF/HMI7""K PB LCD-018-070-KAP RS485" carrier board need to be jumpered to support RS485 fully tested
PEB-C-004.A0 SD Card Adapter "enable expansion board in bootloader env
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phyboard-wega-am335x-1 PB-00802-0200C.A0 RDK 2014 WEGA 3354/800/256R/128F/FF/24V/C PEB-AV-01 (HDMI) PEB-EVAL-01 not tested
PB-00802-0101C.A0 RDK 2014 WEGA 3354/800/256R/128F/FF/5V/C PEB-AV-01 (HDMI) PEB-EVAL-01 boot tests
PB-01402-001.A0 RDK 2014 WEGA 3354/800/256R/128F/FF/5V/C plugable module
PB-00802-010C-SYS.A1 WEGA 3354/800/256R/128F/FF/5V/C disable expansion boards in bootloader env
PB-00802-020C-SYS.A1 WEGA 3354/800/256R/128F/FF/24V/C disable expansion boards in bootloader env
PCM-051-00042F1C.A0 256MB RAM/128MB NAND /800MHz boot tests
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
PEB-AV-02-070W.A0 LCD-018-070-KAP + PEB-AV-02 enable expansion board in bootloader env not tested
PEB-WLBT-01.A2 Expansion board Bluetooth-WiFi enable expansion board in bootloader env not tested
phyboard-wega-am335x-2 PB-00802-008.A0 "WEGA 3354/800/256R/128F/FF/OF7""'/24V/C . PEB-AV-02 (Display) PEB-EVAL-01" not tested
PB-00802-020C-SYS.A1 WEGA 3354/800/256R/128F/FF/24V/C not tested
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
PEB-AV-01.A1 Expansion board HDMI enable expansion board in bootloader env not tested
PEB-WLBT-01.A2 Expansion board Bluetooth-WiFi enable expansion board in bootloader env not tested
phyboard-wega-am335x-3 PB-00802-005.A0 WEGA 3354-1G/512R/512F/FF/5V/I PEB-AV-01 (HDMI) PEB-EVAL-01 Fully tested
PB-00802-310I.A0 WEGA 3354-1G/512R/512F/FF/5V/I disable expansion boards in bootloader env Fully tested
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env ok
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env ok
LCD-018-070-KAP Display 7,0'' enable expansion board in bootloader env, Jumper must be set for resistive touch ok
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch ok
PEB-AV-02-070W.A0 LCD-018-070-KAP + PEB-AV-02 enable expansion board in bootloader env ok
PEB-WLBT-01.A2 Expansion board Bluetooth-WiFi enable expansion board in bootloader env ok
phyboard-wega-am335x-4 PB-00802-410C.A0 WEGA 3354/800/512R/512F/FF/5V/C boot tests
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
PEB-AV-02-070W.A0 LCD-018-070-KAP + PEB-AV-02 enable expansion board in bootloader env not tested
PEB-AV-01.A1 Expansion board HDMI enable expansion board in bootloader env not tested
PEB-WLBT-01.A2 Expansion board Bluetooth-WiFi enable expansion board in bootloader env not tested
phycore-am335x-1 KPCM-051-SYS-LIN-D "512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Display 7"" WVGA" fully tested
KPCM-051-SYS-LINUX 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env
KPCM-051-SYS-LIN-US 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env
PCM-051-12102F0I.A1 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env fully tested
PCM-051-12113F0I.A0 512MB RAM/ NAND/ 8MBSPIFLASH/ 1GHz not tested
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env ok
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env ok
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env ok
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch ok
phycore-am335x-2 PCM-051-23102F0I.A1 1GB RAM/1GB NAND/ 8MBSPIFLASH/800MHz Disable display expansion in bootloader env boot tests
PCM-051-22151F0C.A1 1GB RAM/512MB NAND/ 8MBSPIFLASH/600MHz Disable display expansion in bootloader env not tested
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phycore-am335x-3 PCM-051-01041E0I.A1 256MB RAM/256MB NAND/ 600MHz Disable display expansion in bootloader env boot tests
PCM-051-02041E0I.A1 256MB RAM/512MB NAND/ 600MHz Disable display expansion in bootloader env not tested
PCM-051-02002E0I.A1 256MB RAM/512MB NAND/ 800MHz Disable display expansion in bootloader env not tested
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phycore-am335x-4 PCM-051-0005160C.A1 256MB RAM/128MB NAND /600MHz Disable display expansion in bootloader env not tested
PCM-051-0005160I.A1 256MB RAM/128MB NAND /600MHz Disable display expansion in bootloader env boot tests
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phycore-am335x-5 PCM-051-00051F0I.A0 256MB RAM/128MB NAND/ 600MHz/4KBEE/ETH RTC Disable display expansion in bootloader env boot tests
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phycore-am335x-6 PCM-051-42102F0I.A0 1024MBR/512MBN/8MBSPIFLASH/800MHz Disable display expansion in bootloader env boot tests
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phycore-am335x-7 KPCM-051-SYS-LIN-D "512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Display 7"" WVGA" Jumper carrierboard to use Wifi Adapter boot tests
KPCM-051-SYS-LINUX 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env, jumper carrierboard to use Wifi Adapter
KPCM-051-SYS-LIN-US 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env, jumper carrierboard to use Wifi Adapter
PCM-051-12102F0I.A2 512MB RAM/512MB NAND/ 8MBSPIFLASH/800MHz PCB 1359.x Disable display expansion in bootloader env, jumper carrierboard to use Wifi Adapter boot tests
PCM-051-12113F0I.A0 512MB RAM/ NAND/ 8MBSPIFLASH/ 1GHz jumper carrierboard to use Wifi Adapter not tested
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-RES.A0 Display 7,0'' resistive enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
PCM-958 Expansion board Bluetooth-WiFi ok
phyflex-am335x-1 KPFL-A-03-LIN-D.A0 "256MBDR/512MBNF/LVDS/ETH0 1/EMIC/EEP PBA-B-01.A5 Display 7 cap"
KPFL-A-03-LIN.A0 "256MBDR/512MBNF/LVDS/ETH0 1/EMIC/EEP PBA-B-01.A5" Disable display expansion in bootloader env
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env ok
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env ok
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env ok
LCD-018-070-KAP Display 7,0'' enable expansion board in bootloader env, Jumper must be set for resistive touch ok
phyflex-am335x-2 PFL-A-03-11041D0C.A0 256MBDDR/256MBNF/LVDS/EEP/ETH0/op.CONC not tested
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phyflex-am335x-3 PFL-A-03-1005150C.A0 256MBDR/128MBNF/LVDS/ETH0/op:CON not tested
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' enable expansion board in bootloader env, Jumper must be set for resistive touch not tested
phyflex-am335x-4 PFL-A-03-23113F8I.A0 512MBDDR/1GBNF/LVDS/EEP/ETH0/1/EMIC/SPIF not tested
LCD-018-035-KAP Display 3,5'' enable expansion board in bootloader env not tested
LCD-018-043-KAP Display 4,3'' enable expansion board in bootloader env not tested
LCD-018-057-KAP Display 5,7'' enable expansion board in bootloader env not tested
LCD-018-070-KAP Display 7,0'' enable expansion board in bootloader env, Jumper must be set for resistive touch not tested

Release Notes

Release Notes BSP-Yocto-AM335x-PD15.2.0
===================================

- Linux Kernel 3.12.30
- barebox 2015.09.0
- Yocto 1.8 (fido)
 
Tested Boards:
--------------
 - phyboard-maia-am335x-1
 - phyboard-maia-am335x-3 (only boot tests)
 - phyboard-wega-am335x-1 (only boot tests)
 - phyboard-wega-am335x-2 (only boot tests)
 - phyboard-wega-am335x-3
 - phyboard-wega-am335x-4 (only boot tests)
 - phycore-am335x-1
 - phycore-am335x-2 (only boot tests)
 - phycore-am335x-3 (only boot tests)
 - phycore-am335x-4 (only boot tests)
 - phycore-am335x-5 (only boot tests)
 - phycore-am335x-6 (only boot tests)
 - phycore-am335x-7 (only boot tests)
 - phyflex-am335x-1
 
Tested Yocto Images:
--------------------
 - phytec-qt5demo-image
 
Build Environment:
------------------
 - Ubuntu 14.04 64Bit
 
Features:
------------------
 - Added support for new machines:
        * phyboard-maia-am335x-2
        * phyboard-maia-am335x-3
        * phyboard-wega-am335x-3
        * phyboard-wega-am335x-4
        * phycore-am335x-3
        * phycore-am335x-4
        * phycore-am335x-5
        * phycore-am335x-6
        * phycore-am335x-7
        * phyflex-am335x-2
        * phyflex-am335x-3
        * phyflex-am335x-4
 
 - Added following features:
        * Support for Wifi Expansion PEB-B-001.A2, PEB-WLBT-01.A2 and PCM-958
        * Added support for Maia SD-Card expansion PEB-C-004.A0
        * Added support for RS485 (phyboard-maia-am335x-3)
        * Added support for new displays:
            * LCD-018-035-KAP
            * LCD-018-043-KAP
            * LCD-018-057-KAP
        * Added support for resistive touch on different machines, except phyFLEX-AM335x
        * Updated edt touch driver to support new firmware version
        * Support basic EMMC handling (added EMMC image, added tool to change extended registers in bootloader, added update handler for raw mmc images)
        * Added watchdog support (Only enabled in bootloader as default, see documentation)
        * Add support for ethernet boot
        * Add support for Audio WM8974 Codec on PCM-953
 
- Issues Fixed:
       * Disabled crypto module due to buggy behaviour
       * Added workaround for SMSC link detection issue
 
Known Issues:
-----------------------------------
 
 - phycore-am335x-som:
        * Boottests showed in about 2 of 2000 boots that the SMSC LAN8710 phy could not be found.
          The PHY ID readout is wrong. The generic PHY driver will take over. Ethernet is still functional is this case.
 
 - phyboard-maia-am335x-1:
    * digital IO inputs do not work with CB Version 1403.2
 
 - phyflex-am335x-1:
    * line in has high distortion

Yocto Project and all related marks and logos are registered trademarks of The Linux Foundation. This website is not, in any way, endorsed by the Yocto Project or The Linux Foundation.