Übersicht

Yocto project

BSP-Yocto-i.MX 6-PD14.2-rc1

Die untenstehenden BSP Platform Support Tabellen bieten einen Überblick über alle Funktionen und die unterstützten Hardwareplattformen unserer verfügbaren Releases.

Platform Support Chart PD14.2-rc1

Machine Name Hardware Article Number Compile Test Passed Alpha Test Passed
phyFLEX-i-MX6-1 PFL-A-02-23237E0.A1/PBA-B-01 X X
phyFLEX-i-MX6-2 PFL-A-02-13237E0.A1/PBA-B-01 X X
phyCARD-i-MX6-1 PCA-A-XL3-233BCC.A2/PBA-A-03 X X
phyBOARD-Alcor-i.MX 6-1 PB-00301-110C.A0 X X
phyBOARD-Subra-i.MX 6-1 PB-00601-001.A0 X X

Feature overview PD14.2-rc1

phyFLE-i.MX 6 phyCARD-i.MX 6 phyBOARD-Alcor phyBOARD-Subra
Environment
Kernel 3.17.x 3.17.x 3.17.x 3.17.x
openGL in final release in final release in final release in final release
QT 4.8.x (5.x in final release) 4.8.x (5.x in final release) 4.8.x (5.x in final release) 4.8.x (5.x in final release)
Features / Interfaces
i.MX 6 Typ QUAD QUAD QUAD QUAD
RAM 1GB on 1 bank 64Bit 1GB on 1/2 bank 64Bit 1GB on 1/2 bank 64Bit 1GB on 1/2 bank 64Bit
NAND Flash
GPMI 1GB ok ok ok
SPI3 - -
NOR FLASH 16MB NOR (M25p80) - 16MB NOR (M25p80) -
i2c1 ok ok ok ok
EEPROM 4KB (atmel, 24c32) 4KB (atmel, 24c32) 4KB (atmel, 24c32) 4KB (atmel, 24c32)
PMIC da9063 da9063 da9063 da9063
i2c2 ok ok ok ok
Audio Line Out, Line In, Speaker, Headphone, Mic (Tlv320aic3007) Line Out, Line In, Mic (Tlv320aic3007) - -
Touch Capacitive (edt-ft5x06) Capacitive (edt-ft5x06) Capacitive (edt-ft5x06) -
RTC nxp,rtc8564 nxp,rtc8564 nxp,rtc8564 nxp,rtc8564
ADC maxim,max1037 maxim,max1037 - -
i2c3 ok - - ok
CAN ok - ok ok
Ethernet 10MBit/100MBit/1GBit 10/100 MBit 10/100 MBit 10MBit/100MBit/1GBit
PCIe ok - - -
PWM1 ok - ok ok
UART UART 3/4 UART 3 UART 3/4 UART 4
USB Host ok ok ok ok
USB OTG host/device host/device host/device host/device host
SD SD2/SD3 SD3 SD3 SD3
DVFS ok ok ok ok
Backlight ok ok ok -
GPIO LEDs ok - - -
HDMI ok - - ok
Display LCD-018 7" LCD-018 7" LCD-25 7" -
SATA ok - - -
Kameras in final release in final release in final release in final release
Video decoder in final release in final release in final release in final release
Video encorder in final release in final release in final release in final release

Release Note Fix

Aufgrund der Race Condition im Build-System kann es vorkommen, dass die Barebox oder der Linux Kernel nicht korrekt konfiguriert werden und das System nicht startet.

Leider hat der Fix es nicht in das Release geschafft. Als Zwischenlösung können Sie die Barebox nach dem Bild generieren

bitbake -c cleanall barebox barebox-ipl linux-ti && bitbake phytec-hwbringup-image -c rootfs -f

Das ist nur einmalig nach dem ersten Build nötig.

Yocto Project and all related marks and logos are registered trademarks of The Linux Foundation. This website is not, in any way, endorsed by the Yocto Project or The Linux Foundation.