Übersicht

Yocto project

BSP-Yocto-i.MX 6-PD15.2.0

Die untenstehenden BSP Platform Support Tabellen bieten einen Überblick über alle Funktionen und die unterstützten Hardwareplattformen unserer verfügbaren Releases.

Platform Support Chart PD15.2.0

Machine Name Hardware Article Number Compile Test Apollo Testsystem Pass
phyboard-alcor-i-mx6-1 PB-00301-110C.A0 Teststed in former Release Teststed in former Release
phyboard-mira-i-mx6-1 PB-01501-002.A2 (i.MX 6 Quad, 1GB RAM) Success Yes
phyboard-mira-i-mx6-2 PB-01501-001.A2 (i.MX 6 Solo, 256MB RAM) [Not verified RAM calibration values] Success Yes
phyboard-subra-i-mx6-1 PB-00601-001.A0 Teststed in former Release Teststed in former Release
phycard-i-MX6-1 PCA-A-XL3-233BCC.A2/PBA-A-03 (i.MX 6 Quad, 1GB RAM on two banks) Teststed in former Release Teststed in former Release
phycard-i-mx6-2 non-standard/PBA-A-03 (i.MX 6 Quad, 1GB RAM on one bank) Teststed in former Release Teststed in former Release
phyflex-i-mx6-10 non-standard/PBA-B-01 (i.MX 6 Solo, 128MB RAM on one bank, no NOR) Teststed in former Release Teststed in former Release
phyflex-i-mx6-1 PFL-A-02-23237E0.A1/PBA-B-01 (i.MX 6 Quad, 1GB RAM on two banks, 16MB NOR) Teststed in former Release Teststed in former Release
phyflex‑imx6‑2 PFL-A-02-13237E0.A1/PBA-B-01 (i.MX 6 Quad, 1GB RAM on one bank, 16MB NOR) Teststed in former Release Teststed in former Release
phyflex-i-mx6-3 non-standard/PBA-B-01 (i.MX 6 Quad, 2GB RAM two banks, 16MB NOR) Teststed in former Release Teststed in former Release
phyflex-i-mx6-4 PFL-A-02-55237E0.A3/PBA-B-01 (i.MX 6 Quad, 4GB RAM on two banks, 16MB NOR) Teststed in former Release Teststed in former Release
phyflex-i-mx6-5 non-standard/PBA-B-01 (i.MX 6 Quad, 512MB RAM on one bank, 16MB NOR) Teststed in former Release Teststed in former Release
phyflex-i-mx6-6 PFL-A-02-23247E0X.A1/PBA-B-01 (i.MX 6 DualLite, 1GB RAM on two banks, 16MB NOR) Teststed in former Release Teststed in former Release
phyflex-i-mx6-7 PFL-A-02-13247E0X.A0/PBA-B-01 (i.MX 6 DualLite, 1GB RAM on one bank, 16MB NOR) Teststed in former Release Teststed in former Release
phyflex-i-mx6-8 PFL-A-02-0200541.A0/PBA-B-01 (i.MX 6 Solo, 512MB RAM on one bank, no NOR) Teststed in former Release Teststed in former Release
phyflex-i-mx6-9 non-standard/PBA-B-01 (i.MX 6 Solo, 256MB RAM on one bank, no NOR) Teststed in former Release Teststed in former Release

Feature Overview PD15.2.0

phyBOARD-Mira Full Featured phyBOARD-Mira Low Cost
Environment Kernel linux-mainline-3.19.5-phy6 linux-mainline-3.19.5-phy6
Barebox barebox-2015.07.0-phy1 barebox-2015.07.0-phy1
Yocto 1.7 1.7
OpenGL OpenGL ES 1.1 and OpenGL ES 2.0 (Vivante GC2000 (i.MX 6 Quad) and Vivante GC880 (i.MX 6 Solo/DualLite)) OpenGL ES 1.1 and OpenGL ES 2.0 (Vivante GC2000 (i.MX 6 Quad) and Vivante GC880 (i.MX 6 Solo/DualLite))
OpenEGL OpenEGL 1.4 OpenEGL 1.4
OpenCL OpenCL 1.1 EMBEDDED_PROFILE (only Vivante GC2000 (i.MX 6 Quad)) OpenCL 1.1 EMBEDDED_PROFILE (only Vivante GC2000 (i.MX 6 Quad))
OpenVG OpenVG 1.1 (Vivante GC2000 (i.MX 6 Quad) and Vivante GC880 (i.MX 6 Solo/DualLite)) OpenVG 1.1 (Vivante GC2000 (i.MX 6 Quad) and Vivante GC880 (i.MX 6 Solo/DualLite))
Qt 5.3.2 (using the eglfs backend) 5.3.2 (using the eglfs backend)
Interfaces
SPI
NOR Flash ok -
NAND Flash ok ok
I²C
EEPROM not supported not supported
PMIC ok ok
Touch ok (capacitive and resistive) ok (capacitive and resistive)
RTC ok ok
CAN ok -
Ethernet ok ok 10/100 Mbit
UART 2x ok 2x ok
PCIe ok -
USB Host ok ok
USB OTG host/device ok ok
SD ok (µSD) ok (µSD)
DVFS ok ok
Backlight ok ok
GPIO/LEDs ok ok
HDMI ok ok
Display - -
Camera VM010 BW -

Release Notes

PD15.2.0                             20/08/2015
----------------------------------------------------------
- Linux Kernel 3.19.5
- barebox 2015.07.0
- Yocto 1.7 (dizzy)

Tested Boards:
---------------------
- phyboard-mira-imx6-3
- phyboard-mira-imx6-4

Tested Yocto Images:
-------------------------------
- phytec-qt5demo-image


Build Environment:
--------------------------
- Ubuntu 14.04 64Bit

 

Features:
--------------
- phyboard-mira-imx6-3
            * PCIe
            * HDMI
            * USB Host
            * USB OTG device and host
            * µSD
            * RTC (i.MX 6 RTC, I2C RTC)
            * I2C EEPROM
            * CAN
            * DVFS
            * 1Gbit Ethernet
            * NAND
            * SPI-NOR
            * PMIC (DA9062)
            * 1x UART
            * Phytec PEB-EVAL-01 (UART)
            * Phytec PEB-AV-02 with Dipslay ET0700
            * 10'' Display auog104stn01
            * Qt5 with eglfs backend (OpenGLES)


- phyboard-mira-imx6-4
            * HDMI
            * USB Host
            * USB OTG device and host
            * µSD
            * RTC (i.MX 6 RTC, PMIC RTC, I²C RTC)
            * DVFS
            * 10/100 Mbit Ethernet
            * NAND
            * PMIC (DA9062)
            * 1x UART
            * Phytec PEB-EVAL-01 (UART)


Known issues:
---------------------
              * EEPROM not supported
              * PMIC RTC not supported
              * phytec-color-shifter crashes sometimes, will be replaced in next release

Yocto Project and all related marks and logos are registered trademarks of The Linux Foundation. This website is not, in any way, endorsed by the Yocto Project or The Linux Foundation.