Yocto project

Übersicht

BSP-Yocto-Vendor-phyBOARD-Segin-PD17.1.0

Die untenstehenden BSP Platform Support Tabellen bieten einen Überblick über alle Funktionen und die unterstützten Hardwareplattformen unserer verfügbaren Releases.

Release Notes

Release Notes phyBOARD-Segin Vendor BSP
====================================

BSP-Yocto-Vendor-phyBOARD-Segin-PD17.1.0      2017-07-12
---------------------------------------------------------------------------------------------

- Linux NXP Vendor Kernel v4.1.15-phy2
  (based on NXP Tag rel_imx_4.1.15_2.1.0_ga)
- Barebox v2017.04.0-phy2
- Yocto 2.2.1 (morty)


Tested Yocto Images:
---------------------------------
- phytec-qt5demo-image on:
  * phyboard-segin-imx6ul-2
  * phyboard-segin-imx6ul-4

- phytec-headless-image on:
  * phyboard-segin-imx6ul-3


Build Environment:
-----------------------------
- Ubuntu 14.04 64Bit


Features:
--------------
- Added support for new machines:
               * phyboard-segin-imx6ul-2 (phyBOARD-Segin full featured)
               * phyboard-segin-imx6ul-3 (phyBOARD-Segin low cost)
               * phyboard-segin-imx6ul-4 (phyBOARD-Segin full featured with RS485)

- Removed support for machines:
               * phyboard-segin-imx6ul-1

- Added new features:
               * NXP vendor kernel
               * Support for displays:
                               * AC158 (7" capacitive)
                               * AC156 (7" resistive)
               * Support resistive touch
               * Booting barebox from NAND
               * Support USB-Host in barebox
               * QT5 (5.7.1) support, QT5 Demo is working with limited functionality
                 (see Known Issues/Limitations)
               * Camera support for:
                                * VM-010-BW
                                * VM-010-COL
               * RS485 support (kernel)
               * Support for 2 Ethernet ports (kernel)
               * PXP support (kernel)

- Existing features (from ALPHA release):

                * PEB-AV-02 support
                * PEB-EVAL-01
                * RS232 (barebox/kernel)
                * EEPROM support (barebox/kernel)
                * USB-Host support (kernel)
                * USB-OTG support (kernel)
                * Ethernet 100 MBit (barebox/kernel)
                * CAN (kernel)
                * NAND support (barebox/kernel)
                * MMC support (barebox/kernel)
                * Audio support (Line IN/OUT, Speaker) (kernel)
                * Support for RTC (kernel)
                * ADC support (kernel)


Known Issues/Limitations:
-----------------------------------------
- When booting from MMC sometimes (about 5 in 1000) barebox and kernel
  fail to attach the NAND devices
- ADC provides uncalibrated values
- Booting the root filesystem over NFS is not possible
- Following displays are not supported with the NXP vendor kernel:
                 * AC101 (3,5" capacitive)
                 * AC102 (4,3" capacitive)
                 * AC103 (5,7" capacitive)
- Multimedia page is removed from QT5 Demo
- Webbrowser page is removed from QT5 Demo due to lack of openGL support
- Multitouch page is removed from QT5 Demo due to lack of openGL support
  (necessary for shader effects)
- Building the SDK with Yocto is not working (Patch is available)


Changes to Release Notes:
-----------------------------------------
2017-10-13
- correct display article numbers
- add morty subversion

Supported HW

Software compatible platform Article number Hardware description Software descripton
phyboard-segin-imx6ul-2 PB-02013-001.A2 512MB RAM / 512MB NAND / i.MX6 UL 528MHz / EEPROM / 10/100Mbit Eth
PEB-EVAL-01.A1 Evalution Board for phyBOARD Wega enable expansion board in bootloader env
PEB-AV-02 AV-ADAPTER enable expansion board in bootloader env
AC158 Display 7,0'' G-ETM0700G0EDH6 + 800 x 480 + capacitive enable expansion board in bootloader env
AC156 Display 7,0'' G-ETM0700GBDH6 + 800 x 480 + resistive enable expansion board in bootloader env
phyboard-segin-imx6ul-3 PB-02013-002.A2 256MB RAM / 128MB NAND / i.MX6 ULL 528MHz / EEPROM / 10/100Mbit Eth
PEB-EVAL-01.A1 Evalution Board for phyBOARD Wega enable expansion board in bootloader env
PEB-AV-02 AV-ADAPTER enable expansion board in bootloader env
AC158 Display 7,0'' G-ETM0700G0EDH6 + 800 x 480 + capacitive enable expansion board in bootloader env
AC156 Display 7,0'' G-ETM0700GBDH6 + 800 x 480 + resistive enable expansion board in bootloader env
phyboard-segin-imx6ul-4 PB-02013-XXX.AX 512MB RAM / 512MB NAND / i.MX6 UL 528MHz / EEPROM / 10/100Mbit Eth / RS485
PEB-EVAL-01.A1 Evalution Board for phyBOARD Wega enable expansion board in bootloader env
PEB-AV-02 AV-ADAPTER enable expansion board in bootloader env
AC158 Display 7,0'' G-ETM0700G0EDH6 + 800 x 480 + capacitive enable expansion board in bootloader env
AC156 Display 7,0'' G-ETM0700GBDH6 + 800 x 480 + resistive enable expansion board in bootloader env

Yocto Project and all related marks and logos are registered trademarks of The Linux Foundation. This website is not, in any way, endorsed by the Yocto Project or The Linux Foundation.