YOUR PROJECT START

phyBOARD®-Mira
Imaging kit

phyCAM-S + development kit with NXP i.MX 6

  • based on phyCORE-i.MX6
  • phyCAM-S +
  • Linux 4x
  • VM-010-BW-LVDS-M12
  • NXP i.MX 6 processor

Kit contents:

  • phyBOARD Mira i.MX 6
    (ARM Cortex-A9, 4x 1 GHz, 1 GB DDR, 1 GB Flash)
  • Camera module VM-010-BW-LVDS-M12 incl. Cable
  • M12 lens, M12 (S-Mount), f = 12mm
  • HDMI and LVDS connector, color, with touch, incl. Cable
  • Embedded Linux BSP
  • Pre-installed image
  • Serial cable
  • Ethernet cable
  • Camera cable 50 cm
  • Power Supplies
  • LiveUSB stick with drivers, demos, examples
  • Commissioning guarantee

Description:

The compact phyCORE-i.MX 6 module offers very good prerequisites for integrating sophisticated image processing into compact devices. The heart of the module is the i.MX 6 processor from NXP, which is based on the ARM Cortex-A9. It is optionally available as a single, dual or quad-core version with up to 1,2 GHz each. The i.MX 6 has two independent camera inputs with integrated preprocessing (IPU and VPU).

The two camera interfaces of the i.MX 6 controller are available as parallel inputs on the phyCORE module. The ready-made phyCAM camera modules from PHYTEC can be connected very easily.

On the software side, the camera modules and camera interfaces of the controller are mapped as V4L2 interfaces and can easily be integrated into the application software. A camera interface is brought out as a serial phyCAM-S / S + interface on the base board (100 mm x 72 mm). Due to the flexibility of the standardized camera interface, the kit can also be combined with other phyCAM-S / S + cameras. We would be happy to advise you and put your kit together individually.

In addition to the phyCORE-i.MX 6 module with base board, the kit also includes the VM-010-BW-LVDS-M12 camera module (WVGA resolution, monochrome). The camera is supplied with an M12 lens holder and a suitable lens f = 12mm. The kit contains the necessary connection cables as well as the Linux BSP and manual.

Modules phyCORE-i.MX 6
SOM mounting Connector insertion
Processor i.MX 6Quad
Architecture ARM Cortex-A9
Frequency 4x 1 GHz
NAND Flash 1 GB
SPI NOR Flash 16 MB
RAM DDR3 1 GB
EEPROM 4 kB
Ethernet 1x 10/100/1000 Mbit / s
USB 1 x host, 1x host / OTG
Serial 1x RS232
Digital I / O via expansion connector
PCle 1x miniPCIe
Mass memory microSD card slot
Display LVDS, via optional display adapter PEB-AV-02
Audio I²S via A / V connector
Camera interface phyCAM-S + (8-pin)
Bedroom WVGA monochrome camera VM-010-BW-LVDS-M12
Lens f = 12 mm, M12
Expansion Bus I²C, 2x SPI, UART, JTAG, SD, SATA
User control elements 1x reset button
bootsource SD card, NAND flash
RTC Gold Cap Backup
Power Supply 12-24 V via power adapter
Dimensions 100mm x 72mm (Pico-ITX format)
temperature range -40 ° C to + 85 ° C
Operating system Linux 4.19.100
Distribution Yocto 2.7.4 (Warrior)

phyBOARD-Mira Imaging Kit

Yocto Linux mainline kernel
Release name Release version Release Notes BSP Manual Yocto Manual Development Env. Guide Miscellaneous
Yocto-Linux HTML5
Release name Release version Release Notes BSP Manual Yocto Manual Development Env. Guide Miscellaneous

Didn't find an answer? Just ask your question in Live Chat

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

phyBOARD-Mira-Imaging-Kit-thumb@2x.jpg

phyBOARD Mira
Embedded Imaging Kit


Item No.: KPB-01501-Video-L01


Available variants:

Quantity:

Sample price: Info

Our sample prices apply to the entire evaluation kit including accessories for commissioning. For example, the sample price of 64 euros for the phyBOARD-Wega AM3354 kit includes, in addition to the serial-ready SBC and a board support package adapted to the hardware, also an HDMI adapter, a power supply unit, cable and the PHYTEC QuickStart Guide.

PHYTEC sponsors these kits. This gives you the chance to get to know our SBCs and PHYTEC Support without extensive investments. You can find out to what extent our solution can be used in series for your project. And PHYTEC has the chance to convince you of our preliminary work for your project, of the manufacturing quality of the SBCs and of our software in the form of the BSP supplied.

The serial prices of the phyBOARDs are not dependent on the sample prices; the purchase quantities for the kits are limited.

259.00  plus VAT.

Usually deliverable within 1-2 days


Add-on item number Price Order
WiFi / BLE adapterPEB-WLBT-01??. ?? plus VAT.
HDMI adapterPEB-AV-0115.00 plus VAT.
Display Kit: AV adapter, 7 '' EDT display with cap. TouchKPEB-AV-02116.00 plus VAT.

Education + Training _ Use our know-how for your product development

With the know-how transfer from our experts to your developers, you will reach your goal faster!

 

Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.

Do you have questions about an embedded topic? Arrange an online meeting now!

 

Within 30 minutes you will learn new solutions for your project.
You can also secure exclusive offers after your conversation.