Development Kit

Development platform for the NXP i.MX 7

  • 2x ARM Cortex-A7 + Cortex-M4
  • i.MX 7 Pi HAT Connector
  • Up to 8 GB NAND or up to 128 GB eMMC
  • 2x Gigabit Ethernet
  • 2x CAN

Kit contents:

  • phyBOARD-Zeta with phyCORE-i.MX 7 module
  • Linux Yocto BSP
  • i.MX 7 Pi HAT adapter
  • USB cable
  • RS232 cable
  • 2x D-Sub plug 9pol
  • 5 V power supply including connector set
  • Commissioning guarantee
  • Workshop voucher


The phyBOARD-Zeta is used in devices where many interfaces and energy efficiency have a high priority. With the available camera interface you can add value to your product.

Due to the compact form factor of 105 mm x 72 mm, the phyBOARD can be used in many existing housing concepts. The basis is the phyCORE-i.MX 7 module, which thanks to the DSC technology can also be soldered directly - connectors can be omitted.

Modules phyCORE-i.MX 7
SOM mounting Connector insertion
Processor i.MX 7Dual
Architecture ARM Cortex-A7 / Cortex-M4
Frequency Dual 1GHz + 200MHz
Ethernet 2x 10/100/1000 Mbit / s
WiFi via optional WiFi adapter PEB-WLBT-01
USB 1x host, 1x OTG
Serial 2x5 pin headers
CAN 2x5 pin headers
Digital I / O 4x UART, 3x I²C, 2x SAI, 2x MMC / SD / SDIO, 3x SPI
PCle 1x miniPCIe
Mass memory microSD card slot
Display 24 bit TTL (via optional display adapter PEB-AV-02)
Audio via A / V connector
Bedroom MIPI CSI
Expansion Bus USB host, 2x I²C, 5x UART, CAN, SDIO / SD / MMC, 3x SPI, 4x ADC inputs, 3x tamper, 2x PWM, GPIO, 3x3 keypad, MIPI DSI, JTAG
User control elements 1x user LED
bootsource eMMC, NAND Flash, external SD card
RTC Backup battery
Power Supply 5 V
Connectors Samtec 0.5 mm pitch (240 pins)
Dimensions 105 72 mm x mm
temperature range 0 ° C is + 70 ° C
Operating system Linux 4.14.78
Distribution Yocto 2.5 (Sumo)

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32


phyBOARD Zeta
Development Kit

Item No.: KPB-01910-004

Available variants:


Sample price: Info

Our sample prices apply to the entire evaluation kit including accessories for commissioning. For example, the sample price of 64 euros for the phyBOARD-Wega AM3354 kit includes, in addition to the serial-ready SBC and a board support package adapted to the hardware, also an HDMI adapter, a power supply unit, cable and the PHYTEC QuickStart Guide.

PHYTEC sponsors these kits. This gives you the chance to get to know our SBCs and PHYTEC Support without extensive investments. You can find out to what extent our solution can be used in series for your project. And PHYTEC has the chance to convince you of our preliminary work for your project, of the manufacturing quality of the SBCs and of our software in the form of the BSP supplied.

The serial prices of the phyBOARDs are not dependent on the sample prices; the purchase quantities for the kits are limited.

260.00  plus VAT.

Usually deliverable within 1-2 days

Add-on item number Price Order
Power adapter 12-24 VPEB-POW-0119.50 plus VAT.
HDMI adapterPEB-AV-0115.00 plus VAT.
Display Kit: AV adapter, 7 '' EDT display with cap. TouchKPEB-AV-02116.00 plus VAT.

Education + Training _ Use our know-how for your product development

With the know-how transfer from our experts to your developers, you will reach your goal faster!


Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.

Do you have questions about an embedded topic? Arrange an online meeting now!


Within 30 minutes you will learn new solutions for your project.
You can also secure exclusive offers after your conversation.