NEW

phyBOARD®-Pollux
i.MX 8M Plus

The single board computer with the "most intelligent" module phyCORE-i.MX 8M Plus

  • Neuronal Network Accelerator up to 2.3 TOPS
  • Onboard Image Signal Processor
  • Up to 4x Cortex-A53 1,8 GHz 
  • 2x MIPI CSI-2 
  • All processor interfaces available onboard
  • RS-232 / RS-485 switchable on the same connector
  • Measure the power consumption of the module for different load scenarios
  • Support of the i.MX 8M Plus security features
  • Integrated RAUC update client

160 mm x 77 mm

ARM Cortex-A53 / -M7

The phyBOARD-Pollux can either be used as a development platform for the phyCORE-i.MX 8M Plus modules or as a powerful, industry-compatible SBC for the immediate implementation of your product idea. The single board computer serves as a reference design for your customer-specific application and enables the parallel development of the software and base board for the i.MX 8M Plus module. The modern FTDI interface enables software downloads and debugging.

Modules phyCORE-i.MX 8M Plus
SOM mounting Connector insertion
Processor i.MX 8M Plus Quad
Architecture ARM Cortex-A53 / Cortex-M7
Frequency 4x 1.8GHz + 800MHz
SPI NOR Flash 64 MB
eMMC 8 GB eMMC 5.1
LPDDR4 RAM 2 GB
EEPROM 4 kB
Ethernet 2x 10/100 / 1000BASE-T (1x TSN support)
wireless via optional Wi-Fi adapter
USB 2x 3.0 host
Serial 1x RS-232 / RS-485 full duplex / RS-485 half duplex
CAN 2x CAN FD
Digital I / O optionally via expansion connector
PCle 1x miniPCIe
MMC / SD / SDIO microSD card slot
Display LVDS (1x 4 lanes or 1x 8 lanes), MIPI DSI (1x 4 lanes), HDMI
Audio SAI via A / V connector
Bedroom 2x MIPI CSI-2 (phyCAM-M)
Expansion Bus I²C, SPI, SDIO (8-bit), UART, JTAG, USB
JTAG via expansion connector
User control elements 1x reset button, 1x on / off, 1x boot source select
bootsource eMMC, SD Card, NOR, USB Serial Download, Internal Fuses
RTC Real Time Clock (mounted on SoM) with Gold Cap Backup
Power supply 12 V - 24 V
Dimensions 160 77 mm x mm
temperature range -20 ° C to + 85 ° C
Operating system Linux
Distribution Yocto Zeus

phyBOARDPollux

KI kit BSP

Use these BSPs if you have the i.MX 8M Plus phyBOARD®-Pollux AI kit and want to use the pre-installed AI demo.

Release name Release version Release Notes BSP Manual Yocto Manual Development Env. Guide Miscellaneous

Standard NXP BSP

Use these BSPs if you are using the normal i.MX 8M Plus phyBOARD®-Pollux kit have. Only the KI demo is not preinstalled in this BSP.

Release name Release version Release Notes BSP Manual Yocto Manual Development Env. Guide Miscellaneous

Didn't find an answer? Just ask your question in Live Chat

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

Visit our Online showroom with trends and innovations almost as if you could touch them!

 

Take a quarter of an hour and take a look at our new products and technologies with one of our embedded experts - filmed live with two cameras and shown in person!

Education + Training _ Use our know-how for your product development

With the know-how transfer from our experts to your developers, you will reach your goal faster!

 

Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.